Jump to content

? servers

? players online

RAM Upgrade questions

Recommended Posts


  • Content Count:  3052
  • Joined:  08/30/09
  • Status:  Offline

Heyo,

 

My aunt just got an HP from someone and I want to upgrade the 1x 4GB stick of RAM to 8GB of RAM. 

 

Here is the Spec list of the model, https://support.hp.com/us-en/document/c02999007

Memory part:

Quote

Memory type:
PC3-10600 (DDR3-1333) UDIMM memory
Maximum memory:
8GB
Expansion slots:
Two DIMM slots
Standard configurations:
1GB (1 x 1GB)
2GB (1 x 2GB)
3GB (1 x 1GB + 1 x 2GB)
4GB (1 x 4GB)
4GB (2 x 2GB)
5GB (1 x 4GB + 1 x 1GB)
6GB (1 x 2GB + 1 x 4GB)
8GB (2 x 4GB)

 

The physical stick of RAM currently in the PC is a 1x 4GB stick HMT351U6CFR8C-PB, and according to this spec sheet on this stick https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT351U6CFR8C&rk=20&rc=module It runs at 1600, not 1333

 

Does this mean the computer will limit the RAM to 1333?

 

Then, if I am looking to buy another stick, what exactly do I need to look for? Ideally, cheaper the better, so if I can find a compatible 1x 4GB stick that would be ideal.

 

Would any 1333 DDR3 or 1600 DDR3 with CAS of 11 work?

Edited by Labarr
Link to comment

  • Content Count:  2941
  • Joined:  02/11/12
  • Status:  Offline

 

Quote

Does this mean the computer will limit the RAM to 1333?

Yes. The motherboard will underclock the RAM if it is higher than it supports.

 

Quote

Then, if I am looking to buy another stick, what exactly do I need to look for?

You would just need to look for a DDR3 UDIMM that is 4GB.

 

Quote

Would any 1333 DDR3 or 1600 DDR3 with CAS of 11 work?

Yes.

Edited by shoiep
Link to comment

  • Content Count:  2206
  • Joined:  08/30/09
  • Status:  Offline

The motherboard documentation is generally what you would refer to for acceptable speeds. If the computer is currently running one stick at 1600 mhz with no issues then you should be fine getting another stick at the same speed. I can't find the motherboard model in the documentation for that specific model though. That's very odd that the HP documentation shows it only can use 1333 mhz while the installed stick shows its a 1600 mhz model. I would check bios to see what it's actually running at. 

 

I would say try this. If the 1600 mhz stick works then it is most likely being underclocked anyway. Seems like its cheaper to pick up the same one and let it under clock it.

https://www.amazon.com/Hynix-PC3-12800-1600MHz-Unbuffered-HMT351U6CFR8C-PB/dp/B00A8M768E

 

Edit: 2late

Edited by kabLe
Link to comment

  • Content Count:  3052
  • Joined:  08/30/09
  • Status:  Offline

4 minutes ago, kabLe said:

The motherboard documentation is generally what you would refer to for acceptable speeds. If the computer is currently running one stick at 1600 mhz with no issues then you should be fine getting another stick at the same speed. I can't find the motherboard model in the documentation for that specific model though. That's very odd that the HP documentation shows it only can use 1333 mhz while the installed stick shows its a 1600 mhz model. I would check bios to see what it's actually running at. 

 

I would say try this. If the 1600 mhz stick works then it is most likely being underclocked anyway. Seems like its cheaper to pick up the same one and let it under clock it.

https://www.amazon.com/Hynix-PC3-12800-1600MHz-Unbuffered-HMT351U6CFR8C-PB/dp/B00A8M768E

 

Edit: 2late

 

Yea thanks, I did go ahead and already ordered that one, the BIOS doesn't tell me jack shit (thanks HP) but I am fine with trying out this RAM and going from there 

  • Like 1
Link to comment

  • Content Count:  2206
  • Joined:  08/30/09
  • Status:  Offline

2 minutes ago, Labarr said:

 

Yea thanks, I did go ahead and already ordered that one, the BIOS doesn't tell me jack shit (thanks HP) but I am fine with trying out this RAM and going from there 

Hewlett-Packard...more like Huge Piece of junk. Good luck hope it works out!

Link to comment

Reply to Thread

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...